Single Workstation Continuous Monitor with Universal Power Adapter Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
IMPROVED Operator Alarm Alarms when the operator unintentionally disconnects from the monitor or the connection between the banana plug and monitor′s jack is intermittent
Desco Wave Distortion Technology Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap′s path-to-ground* and the presence of its 1 megohm safety resistor
Park Snap Allows the operator to disconnect (and park) a wrist strap when leaving the workstation without creating a false alarm
Single-Wire Impedance Design Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
1.2 Volt Operator Test Voltage Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
<50 Millisecond Alarm Response Time Identifies failures and intermittencies that inferior technologies miss
Continuous Visual and Audible Alarms Illuminates green to indicate proper grounding; illuminates red and sounds audible alarm when intermittent or failed connection occurs
Calibration Verification Use the EMIT 50512 Monitor Calibration Unit to check the test limits of Wave Distortion Monitors without removing them from their workstations
NIST Calibrated with Certificate Included Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
100-240VAC Power Adapter with IEC C14 Style Inlet Connects to a power cord with a IEC C13 outlet connector
Power cord sold separately 200220 Power Cord, Europe Plug
